Metrologic’s MS7820 Solaris vertical mini-slot scanner increases productivity with an unmatched feature set that aggressively scans high-density codes and fits easily into any existing enclosure found in small-item, high-volume retail environments.
Designed to increase system output and lower the total cost of ownership, the MS7820 reduces on-site service costs and downtime in convenience, drug, specialty, liquor, and grocery store environments.
With an extended depth of field and advanced decoding software, cashiers can scan all standard bar codes on the first pass with minimal concern for orientation or print quality.
Multiple on-board interfaces make the MS7820 compatible with most POS systems, while automatic detection of the interface cable expedites system configuration. The MS7820 further simplifies integration by drawing power directly from the host’s 12-volt USB or serial port.
Unlike other comparable devices, the MS7820 includes a troubleshooting visual diagnostic indicator and the capability to perform remote Flash upgrades or software configurations. For investment protection, every scanner comes standard with an integrated RF EAS antenna and the capability to perform interlock with either Checkpoint or Sensormatic systems.
The MS7820 sets itself apart from the field with a multifunctional RS232 auxiliary port that provides a single point of communication for either a hand-held scanner or external scale.
Metrologic offers the MS7820 with one of two optional flex-pole stands for countertop or wall-mounted applications. For harsh checkout environments, the MS7820 provides an optional reinforced protective window.
Reads 5.0 mil Bar Codes: Aggressively decodes high-density bar codes and optimizes checkout procedures
Remote configuration and Flash upgrade
Draws Power from Host through USB or serial ports (12 V)
Depth of Scan Field 0 mm – 255 mm (0” – 10”) for 0.33 mm(13 mil) bar code
Width of Scan Field 100 mm (4’’) @ 0 mm; 323 mm (12.7’’) @ 255 mm (10.0’’)
Scan Speed 1800 scan lines per second
Scan Pattern 5 fields of 4 parallel lines (omnidirectional)
Minimum Bar Width 5 mil (0.127 mm)
Print Contrast 35% minimum reflectance difference
Pitch, Yaw 360°, 60°, 60°
Light Source Visible laser diode 650 nm ± 10 nm
Laser Power 0.900 mW (peak)
Decode Capability Auto-discriminates all standard bar codes, including GS1
DataBar™; for other symbologies call Metrologic
System Interfaces RS232, Keyboard wedge, USB, IBM 468x/469x
Number Characters Read Up to 80 data characters
Beeper Operation 7 tones or no beep
Indicators (LED) Blue = unit powered, ready to scan; Blue flash = good read,
button activation; 7-segment display = failure diagnostic
Dimensions (without stand) 152 mm (6.0”) H x 152 mm (6.0”) W x 92 mm (3.6”) D
Footprint of stand 150 mm (5.9”) x 133 mm (5.2”)
Weight 0.7 kg (1.56 lbs)
Termination Two 10-pin modular RJ45 jacks, One 6-pin modular RJ45 jack
Cable Standard 2.9m (9.5’) straight; for other cables call Metrologic
Input Voltage 12 VDC ± 0.25 V
Power 3.8 W; 4.8 W (with AUX handheld scanner)
Operating Current 320 mA; 400 mA (with AUX handheld scanner)
DC Transformers Class II; 12 VDC @ 1.25 A
Laser Class IEC 60825-1:1993+A1+A2:EN60825-1;1994+A1+A2
EMC FCC part 15, IEC-003, CISPR 22, EN55022 Class B
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -40°C to 60°C (-40°F to 140°F)
Humidity 5% to 95% relative humidity, non-condensing
Light Levels Up to 4842 Lux (450 foot candles)